Description
Functions
TELEMETRY
Allows the monitoring and control of external devices via the radio.
INTELLIGENT AUDIO
Combining noise cancelling technology to remove nusiance noise from the transmission, delivering clear communications.
PRIORITY INTERRUPT
Send a priority transmission to interrupt other calls, ideal for important, critical messages.
PRIORITY SCAN
Allows the radio to automatically scan and switch the user to receive a priority call if transmitted.
PSEUDO TRUNKING
Using pseudo-trunking, a Hytera patented technology, slots can be shared to improve capacity usage with transmissions either direct to device or to a repeater.
Hytera XPT (Extended Pseudo Trunking) enables you to use limited spectrum resources more efficiently, dynamically assigning channel resource without needing a dedicated control channel.
LONE WORKER
The Lone Worker feature uses a timer in the radio to measure inactivity. If the timer expires, a warning is issued, and if there is no response to that, the alarm is triggered.
GPS
(G) version only (via separate antenna), enabling location based services to improve safety and control.
EMERGENCY MODE
Raise an alarm with top priority to a base station or to other radios with the pre-programmed emergency mode, identifying the ID of the person issuing the alarm.
Technical Specifications
General
- Frequency Range
- VHF: 136-174MHz UHF1: 400-470MHz UHF2: 450-520MHz UHF3: 350-400MHz
- Channel Capacity
- 1024 (64 zones with 256 channels per zone)
- Digital Protocol
- ETSI-TS102 361-1,2 & 3
- Supply Voltage
- +13.6v ± 15%
- Dimensions(W×H×D)
- 60 x 174 x 200(mm)
- Weight
- 1.7Kg
- Display
- 2.0” 4 rows 160*128 pixels 262200 colours
- Keypad
- NO (keypad microphone available)
- Programmable Buttons
- 7
Receiver
- Sensitivity (Analog/ Digital)
- 0.22μV (Typical) / 0.3μV /BER5%
- Selectivity TIA-603 ETSI
- 65dB@ 12.5kHz / 75dB@ 20/25kHz 60dB@ 12.5kHz / 70dB@ 20/25kHz
- Intermodulation TIA-603 ETSI
- 75dB@ 12.5/20/25kHz 70dB@ 12.5/20/25kHz
- Spurious Response Rejection TIA-603 ETSI
- 75dB@ 12.5/20/25kHz 70dB@ 12.5/20/25kHz
- Hum and Noise
- 40dB@ 12.5kHz;43dB@ 20kHz; 45dB@25kHz
- Rated Audio Power Output
- Internal (@20 ohm load), 3W; External 8 ohm load), 7.5W
- Max Audio Power Output
- Internal (@20 ohm load), 8W; External 8 ohm load), 20W
- Rated Audio Distortion
- ≤3%
- Audio Response
- +1~-3dB
- Conducted Spurious Emission
- < -57dBm
Transmitter
- RF Power Output (Low Power)
- UHF1/UHF2/UHF3; 5-25W; UHF5: 10-25W VHF1NHF3: 5-25W
- RF Power Output (High Power)
- VHF1: 5-50W; UHF1/UHF2/UHF3: 5-45W; UHF5: 10-35W(806-900MHz), 10-30W(900-941MHz)
- FM Modulation
- 11 K0F3E@ 12.5kHz; 14K0F3E@ 20kHz 16K0F3E@ 25kHz
- 4FSK Digital Modulation
- 12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW
- Conducted/Radiated Emission
- -36dBm≤1GHz; -30dBm> 1GHz
- Modulation Limiting
- ±2.5kHz@ 12.5kHz; ±4.0kHz@ 20kHz; ±5.0kHz@ 25kHz
- FM Hum & Noise
- 40dB@ 12.5kHz; 43d8@ 20kHz; 45dB@25kHz
- Adjacent Channel Power
- 60dB@ 12.5kHz; 70dB@ 20/25kHz
- Audio Response
- +1~-3dB
- Audio Distortion
- ≤3%
- Digital Vocoder Type
- AMBE+2™ or SELP
- Digital Protocol
- ETSI-TS102 361-1,-2,-3
Environmental Specifications
- Operating Temperature
- -30°c -+60°c
- Storage Temperature
- -40°C -+85°c
- ESD
- IEC 61000-4-2 (level 4) ±8kV (contact) ±15kV (air)
- American Military Standard
- MIL-STD-810 C/D/E/F/G
- Dust & Water Protection
- IP54
- Humidity
- Per MIL-STD-810 C/D/E/F/G
- Shock & Vibration
- Per MIL-STD-810 C/D/E/F/G
GPS (Accuracy specs are for long-term tracking) (5 satellites visible at nominal -130dBm)
- TTFF (Time To First Fix) Cold Start
- <1 minute
- TTFF (Time To First Fix) Hot Start
- <10 seconds
- Horizontal Accuracy
- <5m (50% probable) ;<10m (95% probable)