2063 HF-VHF Cross Gate Barrett

(η τιμή περιλαμβάνει ΦΠΑ)

The Barrett 2063 HF-VHF Cross Gate provides seamless transfer of information from a Barrett VHF network onto a Barrett HF network without operator interaction. The fully automated switching reduces the time it takes to rebroadcast mission critical information. It also significantly reduces the likelihood of communication errors and allows commanders in strategic locations to talk to their deployed assets directly.

A typical field scenario would involve a mobile command vehicle receiving information from deployed troops over a VHF communications system. If this information needs to be passed to a higher headquarters, it would be transmitted using the HF radio link. Any response back from the higher command to the deployed troops would then go through the same procedure in reverse.

The Barrett 2063 Cross Gate operates by establishing a transmit/receive path between HF and VHF networks connected at the Cross Gate station in the mobile command vehicle. When the Cross Gate is “Linked”, the Cross Gate relays all voice transmissions between the two networks.

Κωδικός προϊόντος: HF-VHF 2063 Κατηγορία:

Περιγραφή

Features

INTEROPERABILITY BETWEEN BARRETT HF AND BARRETT VHF COMMUNICATION SYSTEMS

 Interoperability between Barrett HF and Barrett VHF communication systems.

ALLOWS DEPLOYED TROOPS TO COMMUNICATE DIRECTLY WITH FAR DISTANT COMMAND AND CONTROL CENTRES

Allows deployed troops to communicate directly with far distant command and control centers.

REDUCES DELAYS IN COMMUNICATING TIME CRITICAL INFORMATION

Reduces delays in communicating time critical information.

General specifications

  • Indicators: “VHF PTT”, “HF PTT”, “Power on”,
    “HF <-> VHF Linked”
  • Controls: “HF <-> VHF Link Switch”
  • Input Voltage: +13.8VDC from HF radio
  • Input Current: < 100mA @13.8V input

VHF Signal Connections

  • VHF Balanced Audio (RX): RX Balanced audio in, 600 Ohm input
    impedance, 0dBm recommended, DC
    offset 0 to 12V
  • VHF Balanced Audio (RX): Tx audio out, 0dBm nominal into 600
    Ohm load, DC offset 0 to 12V
  • VHF PTT Signal In: Ring (+12VDC), Tip 0VDC
  • VHF Mute Signal Out: Tip (+12VDC), Ring 0VDC
  • VHF Ground: 0V radio ground

HF Signal Connections

  • HF Ground: 0V VHF radio Ground +13.8V +13.8V
    from VHF radio
  • HF Balanced Audio In: RX Balanced audio in, 600 Ohm input
    impedance, 0dBm recommended
  • HF Balanced Audio Out: Tx audio out, 0dBm nominal into 600
    Ohm load
  • HF PTT Out: Active low radio external PTT keying
  • HF mute in: Active low radio mute state input

Environmental

  • Operating temperature: -20C to +55C
  • Storage temperature: -40 to +85C
  • Humidity: up to 95% @ 55C
  • Shock: MIL-STD 810G
  • Vibration: MIL-STD 810G
  • Weight: (including cables) 1050g
  • Weight: (without cables) 650g
  • Dimensions in mm: 203 L x 116 W x 70 H (inc switches and
    connectors)

Επιπλέον πληροφορίες

Βάρος 1,05 kg
TOP
Home
Account
Cart
Search