T-9000E SOFTWARE-DEFINED HF SSB/ISB TRANSMITTER/EXCITER SUNAIR

Description

The Sunair T-9000E is a proven solution in communications applications that require durable, reliable and versatile equipment.
It is designed to be combined with the R-9000E receiver to serve separate location operation or to be used for standalone,
single site transmitter mode.
This next generation transmitter operates continuously (100% duty cycle) with 125 W PEP and average output on AME, NB-FM, USB,
LSB, ISB, CW, Data or MELPe digital voice modes.
The T-9000E uses software-defined digital signal processing (DSP) technology, which supports the latest developments in high-speed waveform processing. This technology improves the functionality of the CPU as well as the Synthesizer, Audio and IF stages.
When working in conjunction with our R-9000E receiver, the radio offers Automatic Link Establishment (ALE) as an internal
option according to MIL-STD-188-141 A/B/C, FS1045A and S4538 as well as remote control and programming via Ethernet
or serial port. A serial port connector on the front panel allows for changes to the unit’s configuration.
The T-9000E, operating alongside an R-9000E, complies with MIL-STD188-203-1A and STANAG 5511/5522 (TADIL-A/Link 11 and NILE/
Link 22) for data link mode. The T-9000E is also compatible with MIL-STD-188-110 A/B/C and STANAG HF modem waveforms.
The radio can accommodate Type 1 encryption such as ANDVT, KY99, KG-84() and KG-40 as well as commercial privacy devices or
optional internal digital voice MELPe F/W with DES 56, AES 128 &
AES 256 encryption functions. The audio interface supports analog or VoIP connections.
T-9000E
Large TFT screen with a wide viewing angle (>45º from normal) shows the working status of the unit in English, while advanced
Built-in test (BITE) capability provides feedback to the lowest level replaceable unit (LRU) level providing English on-screen messages and internal LED indications. The T-9000E can operate from both AC and DC sources, while its internal                           power supply minimizes unwanted RFI and EMC effects.
The radio’s intuitive modular design allows for easy maintenance, expansion and upgrades throughout the equipment’s life cycle
minimal expenditure.

Frequency Range 1.5 MHz – 30 MHz
Frequency Stability ±1 x 10-8 per day after a 30 minute warm-up period
250 programmable channels, Simplex or Half-Duplex, non-volatile Flash memory
CW, AM, SSB, ISB, FSK, Data Mode
Data Bandwidth Up to 24 kHz
Key Local or remote
Analog audio interface Front panel MIC and PHONE jacks, 600 ohm line and VoIP
Synthesizer lock 10ms max
Synthesizer Tuning Step 1 Hz
T/R switching time 10 ms
Remote interface Ethernet, RS-232, RS-422 (point-to-point and bus), RS-485 and
optional internal FSK/PSK Tone modem (leased lines)
Internal encryption (AES 256) and external (ANDVT, KY-99, KG-84(), KG-40
and others) via audio or RS-232
RF Antenna Impedance: 50 ohms, nominal, unbalanced to ground
RF Antenna Connector: Coaxial, UHF female connector
Power Supply Internal (AC voltage), external (DC voltage), independent of LPA
Input voltage
• 28 Vdc ±15 %
• 115/230 Vac ±15 %,50 Hz/60 Hz ±10 %
• Automatic ac/dc switching
Power Consumption < 100 VA
BITE: Error isolated to unit level (LRU). descriptive reading
on the front panel and single unit indicator
MTBF 11,100 hours
MTTR 15 minutes (with parts on hand)
Dimensions
Height: 5.95 inches (15.1 cm)
Width: 17.83 inches (45.3 cm)
Length: 17.66 inches (44.9 cm)
Weight 49 lbs (22.3 kg), without packaging
Construction Internal modular plug-in assemblies, on-site repair
Origin Designed and manufactured in the USA.