HS80A GPS Compass with GLONASS Simrad

Description

Dual IMO compliance Certification as GPS sensor with GLONASS (GNSS)
Primary Navigation System with MX CDU
Heading Device
Customer saves the cost of Navigation antenna. This is an advantage over competitive products available in market
NMEA 2000 interface with supplied adaptor
Easy interface with NMEA 2000 bus and NMEA 2000 devices
1PPS output option with optional 15m Power/Data cable
Pitch, Roll and Heave as standard output
Position and Heading 1 to 20 Hz
DGPS Corrections from SBAS satellites
NMEA 0183 interface with optional 15m power/data cable
HS80A will work in GPS + GLONASS mode with GN70, MX610 and MX612 CDU
CCS (China Classification Society) certification with GN70/MX610/MX612 CDU
HS80A also has NMEA 2000 certification

Specifications
Technical/Environmental
Product Length [mm]	26.1 in / 663 mm
Operating Temperature	-30°C to + 70°C (-22°F to + 158°F)
Operating Temperature Stored	-40°C to + 85°C (-40°F to + 185°F)
Product Width	8.3 in / 209 mm
Product Height	5.8 in / 146 mm
Product Weight	5.4 lbs / 2.4 kg
Humidity Range [rh] 95% non-condensing
Compass Safe Distance [mm]	750
Picth/Roll Angle	1°
Power
Power Consumption	4.3 W nominal (GPS L1 + GLONASS L1), 4.6 W nominal(GPS L1 + GLONASS L1 + Beacon)
Reverse Polarity Protection	Yes
Communications
Baud Rates	4800 – 38400
Correction I/O Protocol	RTCM v2.3 (DGPS), RTCM SC-104, L-Dif
Data I/O Protocol	NMEA 0183, NMEA 2000
Serial Ports	1 full-duplex RS232; 1 full-duplex RS422 and 1 half-duplex RS422 (Tx only)
GPS Navigation
Heading Accuracy	0.5°
Heading Fix	10s typical (valid position)
Rate of Turn	90°/s maximum
Receiver Type	GNSS L1 Compass
Networking Connectors
Connectors	Power/Data Connector: 18-pin, environmentally sealed

Weight	2.4 kg